11
GB
Door open alarm
Ifthedoorisleftopenformorethan180seconds,the
audible warning signal will sound.
Ifthedoormustbeopenedforalengthyperiodtoplace
items into the appliance, cancel the audible warning
signal by pressing the Alarm button.
Thealarmswitchesbacktostandbywhenthedoorisshut.
Temperature alarm
Ifthetemperaturesintheinteriorareoutofthepermittedrange,
the audible warning signal will sound and the temperature display
will flash.
After a lengthy power failure, the temperature in the interior may
have risen to too high a level. After the power supply returns, the
fall in temperature can be watched on the display.
• CanceltheaudiblewarningsignalbypressingtheAlarm button.
The temperature display will stop flashing as soon as the tem-
perature in the interior has reached the set value.
Temperature alarm after a fault in the appliance
Iftheappliancedevelopsafault,thetemperatureintheinterior
may rise too high or fall too low. The audible warning signal will
sound and the temperature display will flash.
Ifthetemperaturedisplayedistoohigh(warm),firstcheckwhether
the door is closed correctly.
Ifthetemperaturedisplaycontinuestoshowavaluethatistoohigh
or too low after one hour, contact the customer service department.
• CanceltheaudiblewarningsignalbypressingtheAlarm button.
IfF3appearsinthedisplay,theappliancehassufferedafault.In
this case, contact the customer service department.
Deactivating the keypad lock
Press for5seconds.Display=
Display=
Display=
Display=
Display=
Adjusting the display brightness
Press for5seconds.Display=
Display=
Display=
Use buttons and to select the desired setting.
h1=minimumbrightness
h5=maximumbrightness
Display=
Display=
The adjusted brightness will be activated after one minute.
Note
If a button is pressed, the display lights up for one minute at
maximum brightness.
When commissioning the appliance, the adjusted brightness will
only be active once the set interior temperature of the appliance
has been reached.
Additional functions
Keypad lock
Thekeypadlockensuresthatnounintentionalchangesaremade
to the electronic control system.
Activating the keypad lock
Press for5seconds.Display=
Display=
Display=
Display=
Display=
Comments to this Manuals