Liebherr HC1070 Use and Care Manual download pdf (Page 6)

(10)Freezer compartment

Up set button

(20)Symbol Power failure

3.2 Temperature display

The following is displayed in normal operation:

the highest freezer temperature

the average cooling temperature

The freezer compartment temperature display flashes:

the temperature setting has been changed

once switched on the temperature is not cold enough

the temperature has risen by several degrees

Flashing dashes appear on the display:

the freezer temperature is above 32 °F (0 °C).

The following displays indicate malfunction. Possible

causes and corrective actions: (see Troubleshooting).

F0 to F9

The power failure symbol flashes.

4 Start-up

4.1 Switching on the appliance

Note

The manufacturer recommends:

Store frozen produce at 0 °F (-18 °C) or colder.

Switch on the appliance approx. 2 hours before loading for

the first time.

4.1.1 Switching on the entire appliance at

the freezer compartment

Open the door.

Press On/Off button, freezer compartment

Fig. 3 (8)

The fridge compartment temperature display shows the

current temperature in the interior.

The freezer compartment temperature display and the

Alarm symbol will flash until the temperature is cold

enough. If the temperature is greater than 32 °F (0 °C),

flashing dashes will appear; if the temperature is lower

than this, the current temperature will flash on the

display.

4.1.2 Switching on the fridge compartment

Note

Before going on vacation or other prolonged periods of

non-use

You can switch the refrigerator compartment on/off

separately from the freezer section.

Open the door.

Press Fridge compartment On/Off button

Fig. 3 (1)

The fridge section is on: Fridge temperature display

Fig. 3 (2)

is on. When the refrigerator compartment door

opens the interior light comes on.

5 Operation

5.1 Temperature display unit

The temperature display can be changed from °F to °C.

5.1.1 To change the unit

Activate setting mode: Press SuperFrost button

Fig. 3 (12)

for about 5 seconds.

S is displayed in the temperature display.

The Menu symbol

Fig. 3 (16)

lights up.

Using Freezer compartment Up button

Fig. 3 (10)

/ Freezer compartment Down button

Fig. 3 (11)

select °.

To confirm: Briefly press SuperFrost button

Fig. 3 (12)

Using Freezer compartment Up button

Fig. 3 (10)

/ Freezer compartment Down button

Fig. 3 (11)

select °F or °C.

To confirm: Briefly press SuperFrost button

Fig. 3 (12)

To exit setting mode: Press Freezer compartment

On/Off button

Fig. 3 (8)

-or-

Wait 5 minutes.

The temperature is again displayed in the temperature

display.

5.2 Child-proof lock

You can use the child-proof lock to lock the

buttons. This means that children cannot acci-

dentally switch off the appliance when playing.

5.2.1 Switching on the child-proof lock

Activate setting mode: press and hold the SuperFrost

button

Fig. 3 (12)

for approximately 5 s.

S is shown on the display.

The Menu symbol

Fig. 3 (16)

lights up.

Using the Freezer compartment Up button

Fig. 3 (10)

Freezer compartment Down button

Fig. 3 (11)

, select c.

Press the SuperFrost button

Fig. 3 (12)

briefly to

confirm.

When

c1 is shown on the display:

To switch on the child-proof lock, press the

SuperFrost button

Fig. 3 (12)

briefly.

The Child safety symbol

Fig. 3 (17)

lights up. c flashes

on the display.

When c0 is shown on the display:

To switch off the child-proof lock, press the SuperFrost

button

Fig. 3 (12)

briefly.

Start-up

6 * Depending on model and options

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Comments to this Manuals

No comments

Liebherr HC1070 Use and Care Manual Page 6

Comments to this Manuals

Related products and manuals for Fridge-freezers Liebherr HC1070