u
To confirm: press the SuperFrost button
Fig. 3 (12)
.
u
Deactivate setting mode: press the Freezer compart-
ment On/Off button
Fig. 3 (8)
.
-or-
u
Wait 2 min.
w
The temperature is again displayed on the temperature
display.
u
Take out the drawer.
u
Clean the ice compartment and drawer with warm
water. If necessary, use a mild dishwashing liquid. Then
rinse.
u
Slide the drawer back in.
u
Leave the IceMaker switched off in this position.
-or-
NOTICE
Residual dishwashing liquid in the ice tray and drawer.
Nausea or irritation of the mucous membrane.
u
Eliminate any residual dishwashing liquid: Throw away
the first three batches of ice cubes.
u
Switching on the IceMaker (see 5.8.10) .
6.4 Customer service
First check whether you can remedy the fault yourself
(see Troubleshooting). If this is not the case, please
contact a qualified service provider.
WARNING
Risk of injury from repairs by non-professionals.
u
Repairs and work on the appliance and the power
supply cable not described in the Manual (see Mainte-
nance) should only be carried out by a qualified service
provider.
u
Read the appliance
designation
Fig. 18 (1)
, service no.
Fig. 18 (2)
and serial
no.
Fig. 18 (3)
from
the rating plate. The
rating plate is located
inside the appliance
on the left-hand side.
Fig. 18
u
Notify a qualified service provider, specifying the fault,
appliance designation
Fig. 18 (1)
, service no.
Fig. 18 (2)
and serial
Fig. 18 (3)
no.
w
This will help us to provide you with a faster and more
accurate service.
u
Keep the appliance closed until the Customer Service
engineer arrives.
w
The food will stay cool longer.
u
Disconnect the power plug (do not pull on the power
cord to do this) or switch off the fuse.
6.5 Appliance Information
Make a note of this information when the appliance is
installed:
Type Designation: _____________________
Service Number: _____________________
Appliance / Serial Number: _____________________
Date of purchase: _____________________
Where purchased: _____________________
7 Troubleshooting.
Your appliance is designed and manufactured for reliable
operation and a long lifespan. If a malfunction nonethe-
less occurs during operation, please determine if the
malfunction is due to an operating error. If a service call
determines operator error, you will be charged for the
costs incurred, even during the warranty period. You may
be able to rectify the following problems yourself:
Problem Possible Cause Correction
The appliance
does not work.
The appliance is not switched on.
u
Switch on the appliance.
The power plug is not properly
inserted in the wall socket.
u
Check the power plug.
The fuse in the wall socket is not OK.
u
Check the fuse.
Troubleshooting.
* Depending on model and options 17
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals