Operating and installation instructionsUpright refrigerator with BioFresh compartment2805147085616 - 01SKBes/SKB/KB/KBes 31/36/42 ... 6
Cooling with SuperCooluBriefly press SuperCool button Fig. 3 (2).wThe SuperCool symbol Fig. 3 (11) lights up in the display.wThe cooling temperature
uThe door racks can be dismantled for cleaning.5.4.8 Removing the bottle holderuAlways take hold of the bottle holderon the plastic part.5.5 Bio
You can adjust the temperature slightly colder or warmer. Thetemperature can be adjusted from b1 (coldest temperature) tob9 (warmest temperatur
NOTICE*The stainless steel doors are provided with a high-qualitysurface coating and must not be treated using the accompa-nying care
The temperature display indicates: F0 to F9→There is a fault.uPlease contact the after-sales service (see Maintenance).DEMO shines in the temperature
Disposing of the appliance* Depending on model and options 15
Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * 88416 Ochsenhausen * Deutschland * www.liebherr.com
Contents1 Appliance at a glance... 21.1 Description of appliance and equipment... 21.2 Range o
-Storage and cooling of medicines, bloodplasma, laboratory compounds or similarmaterials and products subject to the MedicalDevices Directive
Accumulated dust increases the energyconsumption:-Once a year, dust the refrigerating unittogether with the metal grille of the heatexchange
NOTICE identifies a dangerous situationwhich, if not obviated, may result indamage to property.Note identifies useful information and tips.3 Controls
NOTICE*The stainless steel doors are provided with a high-qualitysurface coating and must not be treated using the accompa-nying care
Fig. 5 uLift out the bearing pin Fig. 5 (22) together with washerFig. 5 (23) and adjustable-height foot Fig. 5 (24).uLift off the stopper Fi
WARNINGRisk of injury due to the door dropping out!If the bearing parts are not screwed into place firmly enough,the door may drop out. This
wThe display indicates c.wThe menu symbol Fig. 3 (5) shines.uUsing the Up setting button Fig. 3 (7) and Down settingbutton Fig. 3 (6), selec
Comments to this Manuals