10
Changing over door hinges
1. Remove the door.
3. Reattach the door.
Installing in a kitchen unit
1. Secure the stop bracket in the recess with screws.
2. Connect the appliance to the mains.
5. Then secure the appliance with 3.5 x 17 chip-
board screws through the top bracket.
2. Rotate door by 180°.
4. Slide the appliance into the recess leaving a
21 mm gap between the body of the unit and
the front face of the door.
3. Before installing in a kitchen unit, screw the at-
tachment plate provided onto the appliance
with screws M4 x 8).
Installation dimensions (mm)
Comments to this Manuals