Liebherr HCB2082 Installation Manual

HC/HCB 20827084 845-00HC 2082HCB 2082Installation InstructionsFor Fully Integrated NoFrost Combined Refrigerator-Freezers

10IcemakerSafety Instructions and Warnings • Donotinstallthewaterconnectionwhilethecom-bined refrigerator-freezer is connected to an electri-

11IcemakerFigure 17Figure 189. Open the shut-off valve for the water supply and check the entire water system for leaks.Connection to the Water Supply

Fasten the appliance in the recess - Figure 20Fasten the appliance in the recess through the upper and lower hinges of the refrigerator doors.Use 2 sc

Mounting the attachment brackets onto the door panels - Figure 22Mark lines on the refrigerator door panels as shown in Figure 22.Align the dismounted

Mounting the refrigerator door panels - Figures 24 - 33The description is for one panel only. The procedure is the same for both panels.1. Open the re

To make it possible to fasten the refrigerator panel at the bottom the soft-stop cylinder must be dismantled.5. Grasp the soft-stop cylinder and pull

13. Extend the soft-stop cylinder and connect with the ball stud (Figure 32).Figure 32Figure 3314. Click cover into place (Figure 33).Figure 3112. Fas

Mounting the ventilation grille - Figure 34, 351. Pull out the bottom freezer drawer.2. Remove the blue protection film from the dust filter provide

*708484500*For Service in the U.S.Liebherr Service CenterToll Free: 1-866-LIEBHERor1-866-543-2437Email: [email protected] S

2R600a Refrigerant WARNING! The refrigerant contained within the appliance R600a is environmentally friendly, but flammable. Leaking refrigerant can

3SafetyDisposal of Old Appliance DANGER!Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandone

Unit Dimensions - Figure 1Unit Venting - Figure 3HC/HCB 20 appliances do not require any ventilation openings in the cabinet. The required airflow is

Cabinet Opening Dimensions - Figure 4Figure 4IMPORTANTFor 24" cabinets, the water line opening must be in the location as shown. With cabinets de

Figure 5The panels should be at least 5/8 inch (16 mm) thick to allow the connecting rails to be fastened to them.IMPORTANTThe maximum panel thickness

Figure 6IMPORTANTThe maximum panel thickness is 3/4" (19 mm).Cabinet Opening C Refrigerator door panel D80" (2032 mm) 45 - 3/4" (1162 m

Secure the appliance in place so it does not tip forward when the fully stocked door is opened. The anti tipping bracket is provided with the applianc

Figure 12Cover strips - Figure 12Before connection to the water supply, the cover strips provided must be fitted to the appliance. It is necessary bec