Guidelines for storage at high humidity
Fruit
Apricots up to 13 days
Apples up to 80 days
Pears up to 55 days
Blackberries up to 3 days
Dates up to 180 days
Strawberries up to 7 days
Figs up to 7 days
Blueberries up to 9 days
Raspberries up to 3 days
Red currants up to 7 days
Cherries, sweet up to 14 days
Kiwi up to 80 days
Peaches up to 13 days
Plums up to 20 days
Cranberries up to 60 days
Rhubarb up to 13 days
Gooseberries up to 13 days
Grapes up to 29 days
5.7.5 Setting the temperature in the
BioFresh compartment
Recommended fridge compartment settings: 41 °F (5 °C).
The BioFresh temperature is controlled automatically and
is between 32 °F (0 °C) and 38 °F (3 °C).
You can adjust the temperature slightly higher or lower.
The temperature can be adjusted from b1 (coldest) to b9
(warmest). The default setting is b5. If you select a setting
between b1 and b4 the temperature may fall below 32 °F
(0 °C), causing food to become slightly frozen.
u
To activate setting mode: Press and hold the Super-
Frost button
Fig. 3 (12)
for approx. 5 s.
w
The Menu symbol
Fig. 3 (16)
lights up.
w
The temperature display indicates: S
u
Keep pressing the Freezer compartment Up button
Fig. 3 (10)
until b flashes on the display.
u
To confirm: Briefly press the SuperFrost button.
u
To set a higher temperature: Press the Freezer
compartment Up button
Fig. 3 (10)
.
u
To set a lower temperature: Press the Freezer compart-
ment Down button
Fig. 3 (11)
.
u
To confirm: Press the SuperFrost button.
w
The temperature slowly adjusts to the new
setting.
u
To cancel setting mode: Press the Freezer compart-
ment On/Off button
Fig. 3 (8)
.
-or-
u
Wait 5 mins.
w
The temperature is again displayed on the temperature
display.
5.7.6 Adjusting the humidity in the Hydro-
Safe
u
Low humidity: Move the slide
control to the left.
u
High humidity: Move the slide
control to the right.
5.7.7 Drawers with a cushioning mecha-
nism
Fig. 12
u
Pull the drawer out, lift the back, and pull forward to
remove.
u
Slide the rails back in!
Fig. 13
u
Slide the rails in.
u
Position the drawer and slide it all the way in until you
hear it snap into place.
5.7.8 Humidity control plate
u
To remove the humidity control plate: After removing
the drawers, carefully pull the plate forward and down
to remove.
u
To insert the humidity control plate: Insert the guide
pieces of the plate into the rear retainer
(1)
from below,
then snap the plate into the retainer
(2)
in the front.
5.7.9 Using the FlexSystem
The FlexSystem helps you store and organize your food in
a clear and flexible way. It lets you clearly divide your food
into fruit, vegetables or by use-by dates, for example.
Operation
12 * Depending on model and options
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals