search

Liebherr HCB1060 Use and Care Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
    •
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 19
Problem Possible Cause Correction
The temperature
is not cold
enough.
The door of the appliance is not
closed properly.
u
Close the appliance door.
Insufficient ventilation.
u
Clear and clean the ventilation grille.
The ambient temperature is too high.
u
Solution: (see 1.3)
The appliance was opened too
frequently or for too long.
u
Wait to see whether the required temperature resets
itself by itself. If not, contact the customer service
department (see Maintenance).
Too much fresh food was placed
inside without SuperFrost.
u
Solution: (see 5.8.4)
The temperature is incorrectly set.
u
Set to a colder temperature and check after 24 hours
The appliance is too near to a heat
source (stove, heater etc).
u
Change location of appliance or the heat source.
The appliance was not properly
installed in the recess.
u
Make sure the appliance was installed correctly and
the door closes properly.
The interior light
does not turn
on.
The appliance is not switched on.
u
Switch on the appliance.
The door was open for longer than 15
min.
u
The interior light automatically switches itself off if
the door remains open for approx. 15 min.
The LED interior light is faulty or the
cover is damaged:
WARNING
Risk of injury from electrical shock.
Live parts are under the cover.
u
The LED interior light should only be replaced or
repaired by the Customer Service department or by
engineers trained to do so.
WARNING
Risk of injury from LED lamp!
The lighting intensity of the LED light complies with laser
class 1/1M.
If the cover is faulty:
u
Do not gaze directly at this lighting unit with optical
lenses while very close to the light source. This can
cause damage to your eyes.
The door seal is
faulty or needs
to be replaced
for other
reasons.
On some appliances the door seal is
interchangeable. You can replace it
without the use of any special tools.
u
Contact the customer service department (see Main-
tenance).
The appliance is
iced up or
condensation is
building.
The door seal may have slipped out
of its groove.
u
Check the door seal is well placed in the groove.
Troubleshooting.
20 * Depending on model and options
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments
  • Viagrow Amplicomms Paxton Automotive Baytec Tuff Truck Bag
  • Emerson Gateways/controllers HP Mice Pentax Measuring, testing & control Minelab Measuring, testing & control Chevrolet Unknown
  • Delock 61768 GE JGB700SEJSS KitchenAid 5KSB8270ECA Samsung GT-I8000 Acer S57
  • Acer Aspire ES1-732 User Manual HIS H787F2G2M User's Guide HP Essential Backpack Quick Specifications Hotpoint RLA84 User Manual RedMax EB7001RH Specifications