Liebherr WTUes 1653 Operations Instructions download pdf (Page 10)

Defrosting

The appliance defrosts automatically. The water that forms on the rear wall drains into

a reservoir at the back of the appliance and evaporates automatically through the com-

pressor heat.

Cleaning

Before cleaning always switch off the appliance. Pull out the mains plug or remove/

unscrew the fuse.

Do not use steam cleaners because of the risk of injury and damage.

• Do not use abrasive sponges or scourers, do not use concentrated cleaning agents and

never use cleaning agents containing sand, chloride or acid or chemical solvents, as

these would damage the surfaces and could cause corrosion.

• Use a glass cleaner to clean the glass surfaces and a commercially available stainless-

steel cleaning agent for the stainless-steel surfaces.

• Clean the inside and equipment with lukewarm water and a little detergent, with the

exception of the wooden trims on the grid shelves.

• Ensure that no cleaning water penetrates into the electrical components.

• Dry all parts well with a cloth.

• Do not remove the type plate from the inside of the appliance; it is important for

after-sales servicing.

1 2 ... 5 6 7 8 9 10 11 12 13

No comments

Liebherr WTUes 1653 Operations Instructions Page 10