Liebherr BF1051 User Manual download pdf (Page 18)

BFI/BF1051 / BGEN/es 2956

A delight in freshness

12. Figure 13: Lift up cover (3) on handle side,

push outward; lift up cover (1) on hinge side

and pull off.

13. Unscrew mounting plate (21): first mounting

screw (20), then inner retaining screw (25).

- Unscrew hinge (4): first remove the mounting

screw (20), then retaining screws (25). Fit

hinge (4) to opposite side: for easy assembly,

fit hinge from above and first tighten with the

upper retaining screw (25) M5, then screw

(25) and finally mounting screw M4 (20).

- Turn mounting plate (21) through 180° and

screw tight again on the new handle side: first

retaining screw (25), then mounting screw

(20).

14. Remove the eccentric (5) with the retaining

screw and screw (6) in the hinge (4).

15. On the upper door: Reinstall the door fittings

(16, 17). Pay special attention to the fitting (17)

with the stop.

16. Place the upper door on the center hinge, fit the

bushing (8), stop (7) and washer on the door,

swivel in the door at the top and insert and

secure the hinge pin (2) from above through the

hinge and stop.

17. Re-insert the eccentric (5) with the retaining

screw as shown in the detailed drawing.

Check for proper alignment of all doors. Adjust

them if necessary using the slots on the hinge.

REVERSING

OOR HINGES

Figure 13

180°

180

LBR030

BGEN_7082248_0929_Install_3Lang.qxd 10/21/2004 7:56 AM Page 16

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 109 110

No comments

Liebherr BF1051 User Manual Page 18