Liebherr BF1051 User Manual download pdf (Page 26)

BFI/BF1051 / BGEN/es 2956

3. Open the shut-off valve for the water supply

and check the entire water system for leaks.

Before the appliance is used for the first time a

licensed plumber should bleed air from the

system.

4. Insert the electrical plug for the combined

refrigerator/freezer into the electrical outlet

(Figure 23)

5. Move the combined refrigerator-freezer into

final position in the room.

Figure 23

A delight in freshness

ICE

AKER

Connection to the Water Supply

Figures 23, 24

1. Install the shut-off valve, water filter and

automatic shut-off device as required.

Note

The solenoid valve is located at the rear of your

unit.

2. The 1/4" copper tubing between the shut-off

valve and solenoid valve has a 3/4" male

connector

(Figure 24)

. Make sure there is

approximately 27" (70 cm) of excess tubing

behind the unit for easy connection.

Note

A 3/4" to a 1/4" adapter and cable clip are

supplied with the icemaker.

Remove the cover cap (4) from the solenoid

valve (1). Install the connection bracket (2) with

sealing ring (6) on the solenoid valve (1). Attach

the copper tube to the connection bracket (2).

Secure the copper tube (3) to the appliance

using the cable clip (5).

BGEN_7082248_0929_Install_3Lang.qxd 10/21/2004 7:56 AM Page 24

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 109 110

No comments

Liebherr BF1051 User Manual Page 26