Liebherr NoFrost Freezer With Wlectronic Controls 7082 308-00 User Manual download pdf (Page 5)

GN..3

You are advised to clean the appliance before switching it

on for the ﬁrst time (see "Cleaning").

Switch on the appliance approx. 4 hours before loading it

with frozen food for the ﬁrst time.

Connecting to the mains

Power supply (AC) and voltage

at the operating point must comply with the details on

the type plate, which is located inside the appliance on

the left, ﬁg. A.

W Connect the appliance with a properly earthed fused

plug and socket only.

W The socket must be fused with a 10 A fuse or higher, it

must be away from the rear of the appliance and must be

easily accessible.

W Do not

- connect to stand-alone inverters,

- operate with so-called energy-saving plugs - this can

damage the electronic system,

- connect to the supply with other equipment using an

extension cable - risk of overheating.

W When removing the mains cable from the back of the ap-

pliance, remove the cable holder as well so as to avoid

vibration noise.

The wires in the mains lead are coloured in accordance with

the following code: green/yellow = earth, blue = neutral,

brown = live.

Warning! This appliance must be earthed.

Non-rewireable plugs BS 1363

If this machine or appliance is ﬁtted with a non-rewireable

plug, the following information applies: If the socket outlets

are not suitable for the plug supplied with this product, it

must be cut off and an appropriate plug ﬁtted. The plug cut

from the ﬂexible cord should be disposed of and on no ac-

count be inserted into a 13 A socket elsewhere in the house

(electric shock hazard).

The fuse cover must be re-ﬁtted when changing the fuse,

and if the fuse cover is lost the plug must not be used until

a suitable replacement is obtained. The colour of the cor-

rect replacement cover is that of the coloured insert in the

base of the plug, or the colour that is embossed in words

on the base of the plug (as applicable to the design of the

plug ﬁtted). The correct rating of the replacement fuses that

are ASTA approved to BS 1362 should be ﬁtted. Replace-

ment fuse covers may be purchased from your local elec-

trical suppliers, electricity showroom or approved service

agent.

Switching the appliance on and off

ﬁg. A1

W To switch on: Turn the temperature control 1 with a coin

so that the slot is pointing to setting 2.

- The red visual warning light will be on until the freezer

has reached a sufﬁciently low temperature, then it goes

out. See "Audible warning signal, red visual warning

light" for more information.

- A green light on the temperature display will light up and

indicate that the appliance is in normal mode.

W To switch off: Set the temperature control to "0".

- The temperature display and all buttons will go out.

Operation and control elements

Setting the temperature

ﬁg. A1

W Turn the temperature control with a coin until the desired

temperature is indicated in the display. The slot posi-

tions mean:

Setting 1 = highest temperature,

lowest cooling setting

Setting "max." = lowest temperature,

highest cooling setting

W Recommended temperature setting: -18°C.

Temperature setting display

ﬁg. A1/3

- When the temperature display is illuminated, this indi-

cates that the appliance is running.

- The ﬁve blocks in the display each relate to a different

temperature range. They indicate the freezer tempera-

ture setting you have selected.

- Within the temperature / setting range, e.g. when the

display reads -15 °C to -18 °C, or between two set-

tings*, the temperature can be set slightly colder. If

required, slowly turn the temperature control 1 further -

the light displaying the temperature range, e.g. -18 °C,

ﬂashes for a short time. This conﬁrms the higher setting

within the small temperature range.

Audible warning signal,

red visual warning light

ﬁg. A1

The audible warning signal and the red visual warning light

are designed to help you to protect your frozen food and to

save energy.

W The audible warning device is switched off by press-

ing the audible warning on/off button 4.

- It switches off automatically as soon as the temperature

is low enough.

- It always sounds if the freezer temperature is not low

enough (dependent on the temperature setting).

- The red visual warning light will ﬂash simultaneously.

This can be caused by:

- warm, fresh food being placed in the freezer,

- too much warm air from the outside entering when re-

arranging or removing frozen food. These temperature

ﬂuctuations will not affect the quality of the frozen food.

- When the audible warning on/off button is pressed, the

visual warning light will stop ﬂashing and will light up

continuously. It will only go out once the alarm status

stops and the temperature inside the freezer is low

enough. The audible warning signal will then switch

back to standby automatically.

W If the SuperFrost button ﬂashes at the same time as

one of the lights on the temperature display, this means

that your appliance has a fault. Contact your customer

service department and tell them that this visual warning

is active, so that they can arrange for your appliance to

be serviced accurately and quickly.

* Depending on model and options

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Liebherr NoFrost Freezer With Wlectronic Controls 7082 308-00 User Manual Page 5

Comments to this Manuals

Related products and manuals for Fridge-freezers Liebherr NoFrost Freezer With Wlectronic Controls 7082 308-00