Liebherr UPR51 Installation Guide

Instructionsfor use andinstallationUndercounter refrigerator, pull-outdrawersUPR 513060418 7086656 - 00

Fig. 14 uPush the supplied stainless steel cover trim togetherand place it on the white appliance plinth trim.Fig. 15 uWith the supplied plu

Fig. 19 uFor side fastening, fasten the mounting bracket with ascrew on the right and on the left in the recess.4.3.2 Installing the unit dooruIn

uAttach the unit door on the adjusting bolts Fig. 23 (13)and loosely screw locknuts Fig. 23 (10) onto theadjusting bolts.uClose the d

The adjustment settings are located to the right and leftbelow the bottle shelf on the inner door.The appliance is delivered with the adjus

Fig. 31 Height adjustment, Y:uFully screw out the screws Fig. 31 (36).wDispose of the screws Fig. 31 (36) as they will no longerbe needed.uOnly loosen

-The top of the electric outlet must be located within82-5/8 in. (2100 mm) from the top of the base in thecabinet.4.7 Switch on t

WARNINGDanger of food poisoning!No record will be kept of a power failure during SabbathMode. Thus, during Sabbath mode, if a power failureo

5.7 SuperCoolWith SuperCool you switch to the highest coolingperformance to reach lower cooling tempera-tures. Use SuperCool to rapidly cool lar

5.11 Storing in the lift-up boxFig. 34 uUnopened and securely closed bottles and packagescan be stored in the lift-up box.NoteuDo not load the

uTo dismantle the rack:lift the supporting bars upward,pull out the retainers. The front and rear supportingbars, as well as the glass base ar

Contents1 The appliance at a glance... 21.1 Additional benefits... 21.2 Overview of

Problem Possible Cause CorrectionPower failureuKeep the appliance closed.uProtect the food: place dry ice on top of the food oruse an alternate f

Problem Possible Cause Correctionappliance arehot*.The temperatureis not coldenough.The door of the appliance is notclosed properly.uClose the a

8 Putting appliance out ofservice8.1 Vacation TipsLong vacations: If you will be away for a month or moreuRemove all food from the appliance.uTurn O

contact your Liebherr dealer or distributor or contact theLiebherr designated national service provider:in the US: Service-appliances.us@lie

For Service in the U.S.:Liebherr Service CenterToll Free: 1-866-LIEBHER or [email protected] Solutions, Inc.3501

Fig. 1 (1) Control panel (7) Bottle shelf(2) Interior light (8) Adjustable door(3) Pull-out rack (9) Rating plate(4) Adjustable supportingbars(10)Adju

2 General safety informationRead and follow these instructions. They containsafety advice which is important for safe andproblem-free install

-This product contains chemicals known to thestate of California to cause cancer or repro-ductive harm.-This product can expose you to ch

4.2 Setting up the deviceWARNINGRisk of fire due to short circuit.If the power cable or plug of the appliance or anotherappliance and the b

Fig. 3 Make sure you have the following tools on hand:qCordless screwdriver Torx® 15, 25qHex wrench 13qTorx® 15 screwdriverqSlot screwdriver 6qAllen k

Fig. 6 Fix the foam element centrally in the appliance plinthtrim.The foam element is used to separate the incoming andoutgoing air current

Fig. 10 uInsert the bracket in the opening in the top of the appli-ance and turn it forward.uPush the appliance into the recess and align it,